$192 per square foot! Sounds tempting, right? But hold your horses. Building your Old North State dream home goes way beyond that small amount.
Building involves permits, fluctuating material costs, and surprise expenses – all adding up to thousands of dollars. Then there’s the architect (hello, fees!) and engineer (more fees!). You’re now out of pocket hundreds of thousands of dollars!
Here’s the good news: a move-in ready North Carolina home offers upfront costs. Plus, 23.9% of homes are selling below the asking price, and there’s a 4.3% increase in new listings. So, you have tons of options to score a fantastic deal on your dream home.
Skip construction and move into a home in North Carolina – apply for a home loan right away!
Get Pre Approved for a Mortgage in NC🏡
Select Your Loan Type
-
New Home Purchase
-
Mortgage Refinance
-
Cash-out Refinance
💸 Home Building is Expensive
- Homeowners spend $451,500 in total to build a house in the Old North State, which is $84,300 more than the median sale price.
- Expensive labor, supply chain issues, and a rise in material costs can further increase your expenses.
- In most cases, it is more affordable to buy a home for sale in North Carolina and move in quickly.
Can I Build My Own House in North Carolina?
Yes, you can build your own house in North Carolina, if you have land in an area of your choice. You have to budget for the time and the cost of building your home though. You will also need permits to build your house.
Permit fees depend on the home value or the construction area. Home building permit laws vary across counties in North Carolina. Refer to your local county’s website or office for more information.
» Permit Costs: Read more about home building permits.
How Much Does It Cost to Build a House in North Carolina?
The average cost per square foot to build a house in North Carolina is $192.50. This doesn’t include land costs, permit fees, excavations, and other costs. Use our cost to build a house calculator to get a fair idea of the construction costs.
Calculate the Cost to Build a House in North Carolina 
Your estimated cost to build a house in NC is:
*Disclaimer: The above estimates are based on research on each state’s local construction rates. Please note that actual costs may vary as per building material price fluctuations.
Cost Breakdown of Building a House in North Carolina
To paint a better picture, here is a house building cost distribution for a 2,500 sq. ft. house in North Carolina:
Hard Costs to Build a House in North Carolina
Hard costs comprise expenses directly involved in the home-building process.
1. Material Cost to Build a New Home: $147,500
Building materials make up approximately 50% of the overall construction prices. You can expect to spend about $50 per square foot on material costs.
The Chief Economist at Associated General Contractors of America, Ken Simonson, expects price hikes and shortages to ease for some products, and to remain volatile for others in 2023.
Here are the material expenses you need to take into consideration while you build your home in North Carolina:
- Flooring: $3 to $12 per sq. ft.
- Drywall: $10 to $13 per sheet
- Siding: $3 to $11 per sq. ft.
- Lumber: $3 to $12 per sq. ft.
2. Contractor(s) Charges: 10% – 20%
You need a contractor or a firm to manage the construction process. A general contractor hires several other professionals involved in the home-building process. They include:
- Electricians
- Architects
- Floor installers
- Plumbers
- HVAC installers
- Carpenters, etc.
A contractor charges around 10% to 20% of the total construction value. The fee depends on several factors, such as property type, detailing, materials, and workforce. Apart from a contractor fee, ensure to account for each professional’s hourly rates.
The average hourly rates of home building professionals in North Carolina are as follows:
| Professionals | Hourly Rate* |
| Flooring Installers | $18.95 |
| Roofers | $21.56 |
| Painters | $17.48 |
| Brick Masons | $22.90 |
| Landscapers | $16.32 |
| General Contractors | $29.56 |
| Plumbers | $24.86 |
| Carpenters | $20.63 |
| HVAC Technicians | $24.18 |
| Structural Engineers | $35.32 |
| Electricians | $24.05 |
3. Electrical Costs: $7,500 – $12,500
The electrical cost for new construction per square foot is $3 to $6. This amount includes both the rough-in as well as the finishing work.
The amount you spend on electrical work will differ depending on the property size, type of wiring, wire material, etc. Some electricians can charge up to $120 per hour.
4. Roof Installation Costs: $3,000 – $34,500
The cost of roofing depends on the type of material you select, the roof’s slope, and the size of your home.
The table below displays North Carolina home roofing prices per square foot for various materials:
| Roofing Material | Avg Cost per 100 Sq. Ft. |
| Asphalt Shingle Roof | $153.20 – $248.96 |
| Tile Roof | $718.14 – $1,149.03 |
| Wood Shake Roof | $502.70 – $660.69 |
| Slate Roof | $694.21 – $1,723.55 |
5. Plumbing Costs: $12,000
Plumbing costs include installing plumbing fixtures such as toilets, faucets, wash basins, bathtubs, etc. Homeowners spend around $4.50 per sq. ft. in plumbing in new construction or $4,080 on average.
You require a plumber to fix the pipes and lay the sewage lines. You also need to install washing machines, dryers, and geysers while custom building a home in North Carolina.
6. HVAC Installation Costs: $12,500
Homeowners pay $1,500 to $12,500 to install a new HVAC system. This cost can further vary as per the size of the cooling area, the type of system, the brand, etc. All these additional factors can increase the HVAC installation cost by $2,000 or more.
Soft Costs to Build a House in North Carolina
Soft costs in home construction contribute to the building process indirectly. They include costs like land costs, permit costs, design costs, etc.
1. Land Costs: $23,300 per Acre
Before you build your house in North Carolina, you need to shop for land. You will incur two costs related to land:
- Land Purchase Cost: The average price per acre in North Carolina is $20,300. The cost of land depends on the size of the house you wish to build as well as the location.
- Preparation Cost: You need to clear the land and level it before starting the construction process. Land preparation costs can be anywhere between $1,500 – $3,000.
🤔 Is it cheaper to build a house in North Carolina if you already own land?
Yes. In most cases, building a house in North Carolina is cheaper if you own the land. You will bear only the cost of building the home. Plus, you can customize your home to your requirements!
» Land For Sale By Owner in North Carolina: Buy land to build a house near you.
2. North Carolina Home Building Permit Costs: $5,000
In North Carolina, contractors need a building permit to construct a new house. Construction or building permits are legal documents that authorize the house-building process.
The permit costs and building codes vary per county. They are usually based on the construction type, occupancy type, home building area, and project scope.
Some permits you may need, along with their average costs are as follows:
- Building Permit: $1,000 to $2,000
- HVAC Permit: $250 to $400
- Plumbing Permit: $50 to $500
- Electrical Permit: $10 to $500
3. Home Interiors: $20,000
Before you move into your new home, you’ll need furniture, electronics, utensils, silverware, and bathroom essentials.
The costs will depend upon your taste, quality of finishes, location, and the outlet you order from. For a 2,500 sq. ft. home, you should budget at least $20,000 on interior furnishings.
4. Home Interior Designer Costs: $5,400
If designing your own home interior isn’t your thing, you can hire an interior designer. A great interior designer will provide you with 3D views and renderings of your home.
An interior designer will also order the right furniture, wall prints, rugs, etc. based on your taste and requirements. They can also help you maximize space utilization.
The cost of an interior designer isn’t cheap. You can budget $5,400; it can be more or less depending on your requirements.
House Building Financing Options
Here are the typical home-building financing options available for you:
Home Construction Loans
The two most prominent home construction loans are:
- Construction-to-Permanent Loan: This loan covers land purchases and home-building costs. It is converted to a conventional mortgage after the construction is complete and you move into the house.
- Construction-only Loan: It only covers the cost of home building. After your home is ready, the entire loan amount is due. You can pay back the loan in cash or take out a mortgage.
Personal Loan
A personal loan will not cover your entire home-building cost. You can opt for a personal loan to finance a specific part of the construction. For example, you can finance landscaping through a personal loan.
Home Equity Loan
A home equity loan applies to homeowners who already have a property and want to finance new construction. Depending on how much equity you own in your existing home, you can finance the entire construction of your new home or a part of it.
» Property Value Estimator: Find your home’s value within a minute.
Is It Cheaper to Build or Buy a House in North Carolina?
It is usually cheaper to buy a home than build a new one. However, by building your own home you get a brand-new residence, customized to your needs.
It costs $301,500 on average to build a home in North Carolina. This figure can add up to $451,500 if you include land costs, excavations, permits, and other expenses. A new home construction can take up to 9 to 12 months.
Whereas you can buy a home in North Carolina for $367,200 (median sale price as of August 2023) in 1.5 to 2 months. So, buying a turnkey home is not just cheaper but also faster.
Find Homes for Sale in NC Under Your Specific Budget
Frequently Asked Questions
How much does it cost to build a 2,000 square foot home in North Carolina?
It costs about $192 per square foot to build a house in North Carolina. So, you would have to spend $384,000 to build a 2,000-square-foot home in North Carolina. These costs will vary depending on the exact location, property type, labor expenses, material costs, etc.
How much does it cost to build a house per square foot in North Carolina?
It costs $192 per square foot to build a house in North Carolina. However, home-building costs depend on several other factors. These include property type, construction area, labor costs, etc.
How much does it cost to frame a house in North Carolina?
It costs about $17 per square foot to frame a house in North Carolina.
How much does a foundation cost in North Carolina?
A foundation costs $5 to $12 per square foot in North Carolina depending on the thickness of the reinforced slab.
